Whether you are in search of military and defense parts, aerospace parts, or other similar product solutions, Satellite To Submarine Parts is your one-stop shop. Thank you for your interest in part number 9568, a Sensor Systems Inc item that is listed alongside the description “Resistor Variable Nonwire Wound” and the NSN 5905008247774. To guarantee a swift procurement process for NSN part number 9568, be sure to request a quote by filling out and submitting the RFQ form below, and one of our experts will offer a customized solution for your comparisons in response.
Note : We Will Not Share Your Information To Any Third Parties.
We list everything with as much relevant information as possible to ensure that customers can swiftly identify and procure the exact products they need. For instance, while part number 9568 is manufactured by Sensor Systems Inc, it is specifically done so under CAGE Code 04454, a unique identifier assigned to a particular facility by the DLA that supplies to various government or defense agencies. Additionally, using the first digits of the NSN 5905-00-824-7774, one can also determine that this part falls under FSC 5905 Resistors. Keeping this in mind, initiate the purchasing process today to see why so many customers depend on us for the NSN items they require.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5905-00-824-7774 Item PartTypeName: RESISTOR,VARIABLE,NONWIRE WOUND | 5905 | 008247774 | 0 | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | U | |||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| 9568 | 6 | 2 | 3 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAQL | BODY STYLE | CYLINDRICAL SERVO MOUNTED |
| ABPC | UNDERCUT WIDTH | 0.0570 INCHES MINIMUM |
| ABPM | BODY DIAMETER | 0.875 INCHES NOMINAL |
| AEDX | SHAFT STYLE | ROUND |
| AEGB | PILOT DIAMETER RUNOUT | 0.001 INCHES |
| APXH | TERMINAL LOCATION | REAR END |
| AXGY | MOUNTING METHOD | CLAMP RING |
| CQFL | FUNCTION CONFORMITY TOLERANCE PER SECTION | -1.00/1.00 SINGLE SECTION |
| CRFJ | TEMP COEFFICIENT OF RESISTANCE PER SECTION IN PPM PER DEG CELSIUS | -400.0/400.0 SINGLE SECTION |
| CRGM | FUNCTION CONFORMITY PER SECTION | SINGLE SECTION ABSOLUTE LINEARITY |
| CRSX | ACTUATOR TRAVEL CONTROL FEATURE | CONTINUOUS MOTION |
| AAPN | SECTION QUANTITY | 1 |
| AARG | RELIABILITY INDICATOR | NOT ESTABLISHED |
| AAVL | PILOT DIAMETER | 0.7500 INCHES NOMINAL |
| AAVM | PILOT LENGTH | 0.0620 INCHES NOMINAL |
| ABPA | UNDERCUT DIAMETER | 0.781 INCHES MAXIMUM |
| ABWV | SHAFT DIAMETER | 0.1243 INCHES MINIMUM AND 0.1249 INCHES MAXIMUM |
| ABXF | SHAFT LENGTH | 0.410 INCHES NOMINAL |
| ADAQ | BODY LENGTH | 0.570 INCHES MAXIMUM |
| AECZ | MOUNTING LIP DIAMETER | 0.8750 INCHES NOMINAL |
| AEDA | MOUNTING LIP DEPTH | 0.0620 INCHES NOMINAL |
| AEDZ | SHAFT BEARING TYPE | BEARING |
| AEFD | ACTUATOR TYPE | SINGLE SHAFT |
| AEFH | EFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION | 130.0 NOMINAL |
| AEFY | SHAFT END PLAY | 0.005 INCHES |
| AEFZ | SHAFT RUNOUT | 0.001 INCHES |
| AEGA | LATERAL RUNOUT | 0.001 INCHES |
| AEGC | SHAFT RADIAL PLAY | 0.002 INCHES |
| AFJN | FRAGILITY FACTOR | MODERATELY RUGGED |
| CQCC | ELECTRICAL RESISTANCE PER SECTION | 1.0 KILOHMS SINGLE SECTION |
| CQCK | ROTARY ACTUATOR TRAVEL IN ANGULAR DEG | 360.0 NOMINAL |
| CQGN | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER | 150.0 SINGLE SECTION |
| CRGD | POWER DISSIPATION RATING PER SECTION IN WATTS | 0.3 FREE AIR SINGLE SECTION |
| CRJS | FIXED TAP QUANTITY PER SECTION | 1 SINGLE SECTION |
| CRKS | TAP LOCATION TOLERANCE PER SECTION | -5.0/5.0 OHMS SINGLE SECTION |
| CRSS | RESISTANCE TOLERANCE PER SECTION IN PERCENT | -10.0 TO 10.0 SINGLE SECTION |
| CSBW | TAP LOCATION FROM CCW TERMINAL PER SECTION IN OHMS | 500.0 SINGLE SECTION |
| CSBX | FUNCTION CHARACTERISTIC PER SECTION | SINGLE SECTION LINEAR |
| CSDH | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER | 85.0 SINGLE SECTION |
| TEST | TEST DATA DOCUMENT | 97942-577R573 DRAWING (THIS IS THE BASIC GOVERNING DRAWING,SUCH AS A CONTRACTOR DRAWING,ORIGINAL EQUIPMENT MANUFACTURER DRAWING,ETC.; EXCLUDES ANY SPECIFICATION,STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAW |
| TTQY | TERMINAL TYPE AND QUANTITY | 4 TURRET |
If You’re Ever Looking for NSN parts Or Have an Aircraft On Ground Situation, Don’t forget That We offer Competitive Pricing and Guaranteed On-Time Delivery.
Request for Quote
